What's new
What's new

Haas vfoe spindle fan replacement

Tryhard

Aluminum
Joined
Oct 26, 2019
Need to replace the fan on a vfoe.
Looks like a typical 10" 115v fan, but read on Haas site that it is a "LOW FLOW" or something???? Is low flow a requirement or just to keep the sound down?
Anyone have input regarding what will work or any cross reference part numbers for that fan?
 
The "low flow" could also mean a blade design with a slightly higher pressure differential capacity than a standard fan, allowing greater mean airflow through a constricted passage. But in reality, you'll probably get acceptance performance from a OTS fan of the right size and RPM. Not terribly expensive, so you can take a flyer on one...
 
What are the fan specs for Haas VFOE Spindle fan?

Milland: But in reality, you'll probably get acceptance performance from a OTS fan of the right size and RPM.

Unfortunately the printed text on my fan labels did not survive the years saturated in the oily mess. So I have no idea what the specs of the fan are. Any help there would be greatly appreciated!


Milland: so you can take a flyer on one...

Huh?
 
It means "take a chance", as in, the fan doesn't cost much, so measure it up, confirm voltage, then go to Allied or one of the other major electronics supply sites and buy a fan that matches as close to what you have at the moment.

Perhaps someone with a VF-0E can give confirming information. Or one of the Haas techs that frequent the site will notice your question.
 








 
Back
Top