m_holcross
Plastic
- Joined
- Jun 29, 2020
- Location
- Perth, Australia
I've just picked up an old 1996 Haas VF-0E with the 4th axis amp and wiring installed.
On the plus side amps are for A/C servo's.
Downside is the magnatek gpd 503 drive and not the vector drive.
What is the recommended rotary table size and model for this machine.
Regards,
Mark
On the plus side amps are for A/C servo's.
Downside is the magnatek gpd 503 drive and not the vector drive.
What is the recommended rotary table size and model for this machine.
Regards,
Mark