StreetSpeed
Hot Rolled
- Joined
- Oct 15, 2008
- Location
- NY
Hola Folks,
I'm currently running some aluminum prototypes for a new medical customer, which could turn into a massive job (which is what they all say, I know...) I have one bore that is 2 inches deep that I needs to be 1.6000-1.6006 . That's plenty of room as far as I'm concerned, once I get the bugs worked out. However, just wondering if any programming gurus know if I could run the part, probe the bore, have the machine look at it's info on the size of the bore, and if the bore is undersized to have it run another skim pass, or to beep at me and call me a jerk if the bore is over sized. I'm not really looking for specifics, just "Sure, one can do that if one know's what one is doing..." or "No, The Haas software isn't up to that task."
Thanks in advance.
I'm currently running some aluminum prototypes for a new medical customer, which could turn into a massive job (which is what they all say, I know...) I have one bore that is 2 inches deep that I needs to be 1.6000-1.6006 . That's plenty of room as far as I'm concerned, once I get the bugs worked out. However, just wondering if any programming gurus know if I could run the part, probe the bore, have the machine look at it's info on the size of the bore, and if the bore is undersized to have it run another skim pass, or to beep at me and call me a jerk if the bore is over sized. I'm not really looking for specifics, just "Sure, one can do that if one know's what one is doing..." or "No, The Haas software isn't up to that task."
Thanks in advance.