DethloffMfg
Cast Iron
- Joined
- Sep 22, 2018
- Location
- Portland, OR
For comparable pricing, and being able to toss the Haas unit in with the machine purchase,these seem like noticeably different designs. Very different filter configurations and the MistAway looks like it uses metal mesh and particulate filters vs the Haas using only metal mesh. The MistAway is a little cheaper and can have a HEPA filter added directly, but looks a little more expensive when the current sensing controller is added on. The Haas unit comes from the factory ready to work with the machine and runs when the spindle is on.
Does anyone here have a preference between the two? I’m working out of a 2-car garage and think this might be pretty necessary with a 50/50 mix of steel and aluminum.
Can the Haas unit be timed through the control to stay on another X seconds after the spindle turns off?
Does anyone here have a preference between the two? I’m working out of a 2-car garage and think this might be pretty necessary with a 50/50 mix of steel and aluminum.
Can the Haas unit be timed through the control to stay on another X seconds after the spindle turns off?