9100
Diamond
- Joined
- Nov 1, 2004
- Location
- Webster Groves, MO
My customer recently had the motor repaired for a Haas indexing table, AKA 4th axis. The encoder has a D9 connector. The connector from the controller had been inepertly reconnected and one wire was broken, so I redid it. I wrote down the color of each wire as I disconnected it and am reasonably sure they are correct but the controller gives error signals. I would like the confirm them but do not have any documentation and Haas is no help. The controller is simply labeled "Servo Controller" with no model number, only a serial number, 3398. Does anyone have a schematic or can take a picture of the wires?
Bill
Bill