I use Autodesk Inventor HSM (similar to fusion360) for programming my 98 Haas VF-0E. The post processor has some output options that are set as defaults but can be changed. One of the defaults is that G00 is disabled and rapids are instead assigned a G01 move at an also optional IPM rate with a default of 500. My machine boasts a whopping 710ipm rapids.
Was also previously told by an aerospace machine operator that the older Haas machines should be run at 50% rapids.
...Not 100%.
Are these things related?
And why not run the machine at 100% rapids? Is this fake news?