Colin Heath
Aluminum
- Joined
- Mar 11, 2017
Hello All,
I have a new ST10 installed and only done around 20 hours in it. I have service coming in multiple times to look at issues but wondered if anyone had experienced the same thing.
Cut a few jobs in beginning and was 0.1 to 0.2mm over size and sometimes under size. Thought it was me putting ‘in computer’ in CAM settings and appeared resolved.
Realised later that when probing tools the offset for X could drift up to .04mm and called HAAS in.
It appeared to only happen after after machine sat for a few day so they changed probe suspecting it was sticking.
Still same issue so thought maybe home reference was out and changed that.
Ran some parts today and first was spot on within 5 Micron, next part 0.1mm under size and next 0.15.
Reprobed and it then shifted 180 Micron!
Service are coming back to look again and feels like either encoder is faulty or mechanical movement somewhere.
Wondered if anyone else had similar please and may help steer us in right direction.
I disconnected thermal compensation probe under instruction today but that didn’t return it back to where it should be.
I have a new ST10 installed and only done around 20 hours in it. I have service coming in multiple times to look at issues but wondered if anyone had experienced the same thing.
Cut a few jobs in beginning and was 0.1 to 0.2mm over size and sometimes under size. Thought it was me putting ‘in computer’ in CAM settings and appeared resolved.
Realised later that when probing tools the offset for X could drift up to .04mm and called HAAS in.
It appeared to only happen after after machine sat for a few day so they changed probe suspecting it was sticking.
Still same issue so thought maybe home reference was out and changed that.
Ran some parts today and first was spot on within 5 Micron, next part 0.1mm under size and next 0.15.
Reprobed and it then shifted 180 Micron!
Service are coming back to look again and feels like either encoder is faulty or mechanical movement somewhere.
Wondered if anyone else had similar please and may help steer us in right direction.
I disconnected thermal compensation probe under instruction today but that didn’t return it back to where it should be.