What's new
What's new

Peck drilling on face with live tooling

FrankieB

Aluminum
Joined
Jun 28, 2019
Any suggestions on peck drilling on the face of the part with live tooling. I can’t use a g83 because when i try to change the parameter ( no spin can) it says the function is locked. These holes are off center.
Thank you
Frankie

Ps. I will also need to rigid tap the same holes.
 
Last edited:
following the format in the book?

%
(LIVE PECK DRILL - AXIAL) ;
T1111 ;
G98 ;
M154 (Engage C-Axis) ;
G00 G54 X6. C0. Y0. Z1. ;
G00 X1.5 Z0.25 ;
G97 P1500 M133 ;
M08 ;
G83 G98 C45. Z-0.8627 F10. Q0.125 ;
C135. ;
C225. ;
C315. ;
G00 G80 Z0.25 ;
M155 ;
M135 ;
M09 ;
G28 H0. (Unwind C-Axis) ;
G00 G54 X6. Y0. Z1. ;
G18 ;
G99 ;
M01 ;
M30 ;
%
 
may not work. but have you tried g73? there is a early live tooling lathe book in my truck that they gave us techs. it may have a work around. but not sure when I'll get a chance to stick my noise in it. maybe tomorrow after work. have you called haas applications? they are good for work arounds.
 
also have you tried thecg83 with the g154 ?? it accesses other features when turned on.
 
no i am not in debug mode. Yes you need to change a parameter to keep the spindle from turning during the drilling and tapping cycle, since it is not an exclusive live tool cycle.
 








 
Back
Top