I have a 2005 VF-2 that I added probing to.
I have the spindle probe working great for X and Y, and Bore measuring.
Today I finally had a chance to finish up the wiring for the OTS.
I got the OTS calibrated, and the Spindle Probe calibrated to the OTS.
When I attempted to use the Spindle Probe to measure the Z surface I get an alarm,
522 ILLEGAL ASSIGNMENT VAR OR VALUE.
It appears the Macro is a newer version than what I need.
It looks like its trying to determine if the machine has Sigma 1 or Sirgma 5 motors.
I'm not as savvy as many with macros, but I'd like to eliminate this check and code it to be Sigma 1.
Looks like it's attempting to write to a variable that didn't exist on this control.
Any Macro Masters out there see an edit they can recommend?
I have the spindle probe working great for X and Y, and Bore measuring.
Today I finally had a chance to finish up the wiring for the OTS.
I got the OTS calibrated, and the Spindle Probe calibrated to the OTS.
When I attempted to use the Spindle Probe to measure the Z surface I get an alarm,
522 ILLEGAL ASSIGNMENT VAR OR VALUE.
It appears the Macro is a newer version than what I need.
It looks like its trying to determine if the machine has Sigma 1 or Sirgma 5 motors.
I'm not as savvy as many with macros, but I'd like to eliminate this check and code it to be Sigma 1.
Looks like it's attempting to write to a variable that didn't exist on this control.
Any Macro Masters out there see an edit they can recommend?