hrhoward
Plastic
- Joined
- Feb 2, 2007
- Location
- Huntsville, AL
Hello,
We have a couple of Haas' laying around with various repairs needed. ('00 VF2, '99 VF0E, '96 VF0E)
The VF2 has a newly rebuilt spindle but the control was freezing up from time to time and now, when powering up, we get a pretty much solid green screen and bupkis.
This board has been sent out and repaired a couple times (under warranty) and each time we get it back it works for a couple days (non production) then starts freezing and then eventually dead.
Was thinking about swapping the processor board out of the '99 (32-3092 rev A) into the '00 (32-3092D rev D).
Software version are '00 1024N, '99 1021N.
I have the parameters for the '00 printed out.
Question is, are they compatible enough?
We have a couple of Haas' laying around with various repairs needed. ('00 VF2, '99 VF0E, '96 VF0E)
The VF2 has a newly rebuilt spindle but the control was freezing up from time to time and now, when powering up, we get a pretty much solid green screen and bupkis.
This board has been sent out and repaired a couple times (under warranty) and each time we get it back it works for a couple days (non production) then starts freezing and then eventually dead.
Was thinking about swapping the processor board out of the '99 (32-3092 rev A) into the '00 (32-3092D rev D).
Software version are '00 1024N, '99 1021N.
I have the parameters for the '00 printed out.
Question is, are they compatible enough?