tm 1 with 7 foot door and 9 foot ceilings?
Close
Login to Your Account
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Feb 2006
    Location
    kc mo
    Posts
    70
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    2

    Default tm 1 with 7 foot door and 9 foot ceilings?

    Is it doable? If so how hard?

    Thanks,

  2. #2
    Join Date
    Jul 2015
    Country
    UNITED STATES
    State/Province
    Illinois
    Posts
    13
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    3

    Default

    Max shipping height is 86" with a max height of 105" with the Z all the way extended and does NOT include the machine resting on leveling pads. The leveling pads are an additional 3.5" of height. Parts from the top of the machine can be removed prior to shipping in order to pass through lower structures, but check with your local HFO if purchasing new for a complete run down on how the machine can be broken down to fit through your opening. Typically they will do it at their showroom prior to delivery, but if you are purchasing used make sure the work is done by a reliable source.

  3. #3
    Join Date
    Apr 2012
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    1,708
    Post Thanks / Like
    Likes (Given)
    1218
    Likes (Received)
    968

    Default

    Quote Originally Posted by skinnj1 View Post
    Is it doable? If so how hard?

    Thanks,

    Also double check your door. Measure how tall the opening is with the trim and how far open the door really gets. Some are 6" shy of the full opening, some are full open. Either way, it should be easy to adjust the door, but the opening is the issue.
    Then, call haas and talk with them about it.
    Then, determine how you are going to get it in there. If you are using a rigger make sure you tell them how short the opening is.

  4. #4
    Join Date
    Mar 2015
    Country
    UNITED STATES
    State/Province
    Arizona
    Posts
    9
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    It will fit. Haas has a memo for how to get it under 7 feet. Request it from your dealer.
    I have a TM-1P that I got in my garage.

  5. #5
    Join Date
    Jan 2014
    Country
    UNITED STATES
    State/Province
    Arizona
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hey I know this post is very old, but I do have a 9ft ceiling and I'm not sure if I need to cut a hole in the ceiling or not for the wire harness umbilical. I have a 2010 TM-2 coming in this Friday...
    Thx

  6. #6
    Join Date
    Jun 2019
    Country
    UNITED STATES
    State/Province
    Maryland
    Posts
    210
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    34

    Default

    TM2 measures around 106 inches ish to the top of the gore tube from what I have been able to dig up.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •