wiring electrical Renishaw OMI
Close
Login to Your Account
Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2018
    Country
    SLOVENIA
    Posts
    7
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default wiring electrical Renishaw OMI

    Hello

    wiring electrical Renishaw OMI

    do I buy for my haas vf2ss year 2007. I have I/O boards with plug P77.

    Omi 2H have …. Ø7.5 mm (0.29 in), 13-core/ wires screened cable,
    Omi 2T have …. Ø5.8 mm (0.23 in), 6-core /wires screened cable,

    so which one 13 wires or 6 wires. the connctro p77 have 10 wires ?

    3333.jpg

  2. #2
    Join Date
    Jul 2016
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    200
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    23

    Default

    The 2T and 2H are slightly different, you have to dig the two wiring sheets for details. Personally, I'd go with the 2H, you'll have more that know about it.

    I assume you already have macros? If not, it by far makes more $ense to buy the haas package.

    As for all the extra wiring, I think there are going to be 4 wires that get used with either option. Power, Gnd, Enable probe, and enable toolsetter.

  3. #3
    Join Date
    Feb 2018
    Country
    SLOVENIA
    Posts
    7
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hello,

    yes they are 6 wire + shield. for omi 2h I have the diagram wire.
    444.jpg


    from omi 2t I must remove low batery and other function. but the problem is which wier.

  4. #4
    Join Date
    Jul 2016
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    200
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    23

    Default

    See wire color descriptions for both. The 2h H-2000-5278-94-A renishaw PDF page 15 gives all color descriptions. Also, its 6 wires not 4 like I said. There are 2 more for the probe. The 2t manual has similar info, slightly different I think.

  5. #5
    Join Date
    Jul 2016
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    200
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    23

    Default

    See page 20 here. http://resources.renishaw.com/en/dow...terface--87265

    This is the housing series, if I have it right. I bought this part to interface from the 2H to my old pcb so I could do it without cutting the end off of the 2H.

    39-1-21 Molex, LLC | Connectors, Interconnects | DigiKey

  6. #6
    Join Date
    Feb 2018
    Country
    SLOVENIA
    Posts
    7
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    The only question is whether the matter will work if we remove those functions. I dolnt like to buy omi 2t and then dont work on haas.

  7. #7
    Join Date
    Jul 2016
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    200
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    23

    Default

    Of course it will work, but you could always wire them up in series so if one is in error, the probe goes open.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •