Any ideas what to look at first for cut differences between the X and Y?
The attached photos were spring passed at 9500RPM / 100IPM with a 1/2" HTC 3 flute carbide tool. The cut sounds exactly the same. Cut length is 1".
Machine is a 96vf2 with rebuilt Y ballscrew, and I reballed the x and y trucks a couple years ago.
The attached photos were spring passed at 9500RPM / 100IPM with a 1/2" HTC 3 flute carbide tool. The cut sounds exactly the same. Cut length is 1".
Machine is a 96vf2 with rebuilt Y ballscrew, and I reballed the x and y trucks a couple years ago.