donie
Diamond
- Joined
- May 17, 2003
- Location
- Walla Walla Wine and Wild Turkey
Apparently, Russia and US not being on good terms, causes a whopping 2 1/2 month customs/shipping delay on this ebay item, but a what seems to be a good usable tool.
This is the 500mm model, about 19 1\2 in long, its made of spring tempered steel, and powder coated, The overall quality seems good. The price was $26 and $12 shipping. They are clear on the order delay.
The clamping end has a wide range using two screws and reversing the jaw, the blade or carbide thickness range looks to be 1/16" to 1/4".
I am, going to be using the tool mostly for scraping rust and paint off of machined surfaces, I have no way scraping to do now.
I think it was worth the wait, this photo using a 3/16 thick carbide blank to help secure a very useful DeWalt carbide edge utility blade, I was able to shave that plywood without the blade digging in, the long length adds stability.
Further information just in, "the termite does not approve of this product."
This is the 500mm model, about 19 1\2 in long, its made of spring tempered steel, and powder coated, The overall quality seems good. The price was $26 and $12 shipping. They are clear on the order delay.
The clamping end has a wide range using two screws and reversing the jaw, the blade or carbide thickness range looks to be 1/16" to 1/4".
I am, going to be using the tool mostly for scraping rust and paint off of machined surfaces, I have no way scraping to do now.
I think it was worth the wait, this photo using a 3/16 thick carbide blank to help secure a very useful DeWalt carbide edge utility blade, I was able to shave that plywood without the blade digging in, the long length adds stability.
Further information just in, "the termite does not approve of this product."
Last edited: