Jersey John
Stainless
- Joined
- May 29, 2015
- Location
- Beccles / Suffolk, United Kingdom
Hi folks
It's years (20+) since I sprayed a machine and then it was Cellulose based paint.
I now have some time to spray my lathe and hopefully my mill too.
I'm looking at using 2k Acrylic but there seems to be lots of maybe "Scare mungering" threads on the net. Fore instance ... Do I really need an air forced face mask?
I'm planning to spray in the open ... any advise greatly received
Thanks
John
It's years (20+) since I sprayed a machine and then it was Cellulose based paint.
I now have some time to spray my lathe and hopefully my mill too.
I'm looking at using 2k Acrylic but there seems to be lots of maybe "Scare mungering" threads on the net. Fore instance ... Do I really need an air forced face mask?
I'm planning to spray in the open ... any advise greatly received
Thanks
John