What's new
What's new

Head 273a Work Head bearings Part Number

enzo23

Plastic
Joined
Jun 22, 2018
Does anyone know the part number for a Heald 273a work head bearings the book shows a number S-593 only
 
The "RED HEAD" grinding heads used 2MM precision class angular contact ball bearings - I would guess the work heads did the same

Like from these folks

Fafnir Cover.jpg
 
I am looking for the part numbers for the two cone bearings in the work head. Work head I mean the head that the chuck is mounted to and the part spins on.
 
Do yourself a favor and call GCH or if you have the machine / head measure the ID and call an industrial bearing house.. If you have a cone it should be easy for them to figure it out. In a head that is probably over 50 years old your gong to have a hard time getting much help. John is probably the most experience guy on here that would know and he sent you what he is offering. GCH also does trades, you send the old one and they will send one back that is reconditioned or rebuilt. Give them a call, will save you some time and it can't hurt.
 








 
Back
Top