What's new
What's new

Reed 3C Vise

john30108

Plastic
Joined
Sep 18, 2020
Good morning, new to forum and I'm not sure if I'm in the right place. I recently purchased a fab table with the Reed 3C vise (5")attached, I'm planning getting everything cleaned up and would like to find a source for a replacement set of vise jaws. They are 5" long, 1/2" thick, 1 5/32" wide. The mounting holes are on 3" centers with a 3/8" locater hole in the middle. The bolts are 5/16x1" tapered head machine screws, the tapered holes are drilled from both sides and allow the jaws to be mounted in any configuration (4way). If anyone has a source or could steer me in the right direction I'd appreciate it. Thanks in advance
 








 
Back
Top