Rex
Aluminum
- Joined
- Oct 16, 2008
- Location
- Kankakee IL
This is from my Sheldon T56 P lathe. There were 2 short setscrews in the threaded holes only 4 or 5 threads long which were folded over sideways and the nut pulled almost 1/2 way out of it's hole.
My first thought would be new holes with longer fine thread setscrews, but I'm seeking advice from the more experienced.
My first thought would be new holes with longer fine thread setscrews, but I'm seeking advice from the more experienced.
Last edited: