Casmer
Plastic
- Joined
- Oct 21, 2020
- Location
- Grant, FL USA
I have an Excel 350 T20 milling center with Fanuc Controls. A few of the buttons are damaged/missing faces and such. I am looking for suggestions on how to replace the buttons. Where to get them, if someone has one of these panels or know what to search for on ebay. Etc.
If you know of any alternatives or possibly what to look for on Digi-Key or Mouser that would also help me alot. Thanks!
If you know of any alternatives or possibly what to look for on Digi-Key or Mouser that would also help me alot. Thanks!