Bridgeport J Head 9 x 48 w/ ballscrews on the X and Y
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Dec 2013
    Brooklyn, NY
    Post Thanks / Like
    Likes (Given)
    Likes (Received)

    Default Bridgeport J Head 9 x 48 w/ ballscrews on the X and Y

    Purchased this mill from a small shop out in Long Island two years ago with the intention of converting it to a CNC mill and it's been sitting in the corner of my space ever since.

    It's a 1966 Bridgeport J Head with step pulleys and a 1HP pancake motor, Serial # 887XX.

    The ways seem to be in good shape (see photos) and aside from a a gouge and hole from the pervious owner, the table isn't too dinged up. The table was removed to pass through a single door and the saddle was pulled at the same time for cleaning - all the parts are with the machine.

    This mill has (I believe ground) zero backlash ball screws on the X and Y axis - which is why I was interested in converting it to CNC.

    This is a project I'm unlikely to get around in the next year, so I'd like to reclaim the space in my shop.

    I paid $1,800 for the machine, but I'm open to any reasonable offer.

    The machine is located in Brooklyn, NY in a warehouse with high and low docks, so loading onto a trailer or truck is a pretty straightforward operation.

    Give me a shout at [email protected] if you're interested.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts