El Mustachio
Hot Rolled
- Joined
- Jul 28, 2010
- Location
- Eastern Washington, USA
I’m selling a number of machines I had held on to after a recent merger we went through. While I had planned on keeping these for personal future use, maybe a home shop or hobby setup, I’m forced to sell them now due to medical debts. These have all been stored inside except for the Marvel Power Hacksaw. It’s only recently been moved out of the building and is not yet in a storage container. All other items have been continuously kept in our shop or in storage containers. Everything was running at the time they were removed in April 2017. We have forklifts available to load and can also continue to store them until shipping can be arranged if necessary. I am unable to arrange shipping though, these would need to be picked up at our shop. We are located at Sunnyside, WA. I will provide directions and available pick up times upon request. Thanks for your time, please let me know if you have any interest in what’s shown below.
Bradford Metal Master Lathe, 16” Heavy
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(0)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(1)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(2)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(3)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(4)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(5)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(6)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(7)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(8)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(9)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(10)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(11)_small.jpg
Pratt & Whitney Heavy Toolmakers Lathe 16”x36”
www.fsifab.com\img\20190824fsiPandW_16x36(0)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(1)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(2)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(3)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(4)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(5)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(6)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(7)_small.jpg
Wells Index Model 55
www.fsifab.com\img\20190824fsiWellsIndex55(0)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(1)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(2)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(3)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(4)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(5)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(6)_small.jpg
Kearny Trecker No. 2-B Universal Milling Machine
www.fsifab.com\img\20190824fsiKnT_No2bUni(0)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(1)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(2)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(3)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(4)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(5)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(6)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(7)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(8)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(9)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(10)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(11)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(12)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(13)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(14)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(15)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(16)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(17)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(18)_small.jpg
Marvel Power Hack Saw Model 9A
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(0)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(1)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(2)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(3)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(4)_small.jpg
Dumore No. 25 3hp Tool Post Grinder
www.fsifab.com\img\20190824fsiDumore25(0)_small.jpg
www.fsifab.com\img\20190824fsiDumore25(1)_small.jpg
Sincerely,
EL Mustachio
EDIT: ignore 'Burke' in subject / post title, should have read K&T.
Bradford Metal Master Lathe, 16” Heavy
- Running but I was in the middle of repairing the acme screw on the cross slide when we were bought out. I have the new screw material (will take a section of LH & RH acme to recreate), original screw, and all the parts necessary to reassemble.
- 2-3 years ago I made a new cast iron chuck adapter plate for the headstock so that a wider variety of chucks could be used.
- Taper attachment included but not currently installed.
- $2400 OBO
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(0)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(1)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(2)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(3)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(4)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(5)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(6)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(7)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(8)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(9)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(10)_small.jpg
www.fsifab.com\img\20190824fsiBradfordMetalmaster_16in(11)_small.jpg
Pratt & Whitney Heavy Toolmakers Lathe 16”x36”
- Running when removed but I was in the middle of making a new chuck adapter for the spindle nose. I’ve machined a bronze copy of the spindle nose for final machining of the cast iron adapter but haven’t had time to finish it. I have the parts necessary to reassemble.
- $1500 OBO
www.fsifab.com\img\20190824fsiPandW_16x36(0)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(1)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(2)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(3)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(4)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(5)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(6)_small.jpg
www.fsifab.com\img\20190824fsiPandW_16x36(7)_small.jpg
Wells Index Model 55
- Running and ready to put into service
- Serial Number 55-6558
- Notes: If you’re not familiar with Wells Index, they do use a less than common spindle taper.
- $1800 OBO
www.fsifab.com\img\20190824fsiWellsIndex55(0)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(1)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(2)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(3)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(4)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(5)_small.jpg
www.fsifab.com\img\20190824fsiWellsIndex55(6)_small.jpg
Kearny Trecker No. 2-B Universal Milling Machine
- Currently powered & in service.
- Notes: We’ve kept this around for large keyways (over 7/8”), which we don’t do much more of. It’s old but also very dependable. A vertical milling machine head for this unit is included but the head has a broken gear tooth. I can provide pictures of the head upon request.
- $1700 OBO
www.fsifab.com\img\20190824fsiKnT_No2bUni(0)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(1)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(2)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(3)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(4)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(5)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(6)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(7)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(8)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(9)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(10)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(11)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(12)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(13)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(14)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(15)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(16)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(17)_small.jpg
www.fsifab.com\img\20190824fsiKnT_No2bUni(18)_small.jpg
Marvel Power Hack Saw Model 9A
- Running when removed. Replaced with Marvel 8 Mark II bandsaw, no problems, just upgraded.
- $1200 OBO
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(0)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(1)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(2)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(3)_small.jpg
www.fsifab.com\img\20190824fsiMarvelPwrHkSw9a(4)_small.jpg
Dumore No. 25 3hp Tool Post Grinder
- Purchased at auction around 2015, never installed. Tested and ran, then stored.
- $2000 OBO
www.fsifab.com\img\20190824fsiDumore25(0)_small.jpg
www.fsifab.com\img\20190824fsiDumore25(1)_small.jpg
Sincerely,
EL Mustachio
EDIT: ignore 'Burke' in subject / post title, should have read K&T.