TravisR100
Cast Iron
- Joined
- Aug 7, 2006
- Location
- Houston, TX
I’ve decided to go a different direction with my shop and so I’m selling some of my machines.
First up is a Doall V26 bandsaw. No blade welder. Replaced the blade guides, brand new blade, new tire on lower wheel. 3 phase. Air pump not working. My plan was to put in a new electric air pump. The table tilt ratchet mechanism was frozen when I got this machine. I ended up removing it. Table can still be tilted but must be loosened from the back of the machine to do so. $1200.
Next is an Atlas 7B shaper in very nice condition. Has the original belt guards, vise, and handle. $1700.
Next is a 12” pedestal grinder made by Standard Electrical Tool Company. It has two brand new wheels from McMaster. 60 and 120 grit. Wheels were $76 each. New dust hoses. Unit works well and is smooth. Beast of a grinder. $700
And last is this Rockwell Delta Tool/Surface grinder. I bought this from a fellow member here who rebuilt it. After I got it I removed the original single phase motor and replaced it with a WEG 3 phase ($180) and a WEG VFD ($150). Both the motor and drive are brand new. Also replaced the pulley with a cast iron pulley from McMaster. New grinding wheel as well. I paid Miles $1200 for this machine prior to putting on the 3 phase motor and VFD. Selling for $1300.
Here is a link to the original thread on this machine...
FS: Rebuilt Delta Milwaukee Surface Grinder
These machines are located in Magnolia, TX (north of Houston) in my climate controlled home shop. These will need to be picked up. I don't have the means to crate or ship. They are all under power and all can be inspected. Happy to take additional pictures or video and provide any additional information.
First up is a Doall V26 bandsaw. No blade welder. Replaced the blade guides, brand new blade, new tire on lower wheel. 3 phase. Air pump not working. My plan was to put in a new electric air pump. The table tilt ratchet mechanism was frozen when I got this machine. I ended up removing it. Table can still be tilted but must be loosened from the back of the machine to do so. $1200.
Next is an Atlas 7B shaper in very nice condition. Has the original belt guards, vise, and handle. $1700.
Next is a 12” pedestal grinder made by Standard Electrical Tool Company. It has two brand new wheels from McMaster. 60 and 120 grit. Wheels were $76 each. New dust hoses. Unit works well and is smooth. Beast of a grinder. $700
And last is this Rockwell Delta Tool/Surface grinder. I bought this from a fellow member here who rebuilt it. After I got it I removed the original single phase motor and replaced it with a WEG 3 phase ($180) and a WEG VFD ($150). Both the motor and drive are brand new. Also replaced the pulley with a cast iron pulley from McMaster. New grinding wheel as well. I paid Miles $1200 for this machine prior to putting on the 3 phase motor and VFD. Selling for $1300.
Here is a link to the original thread on this machine...
FS: Rebuilt Delta Milwaukee Surface Grinder
These machines are located in Magnolia, TX (north of Houston) in my climate controlled home shop. These will need to be picked up. I don't have the means to crate or ship. They are all under power and all can be inspected. Happy to take additional pictures or video and provide any additional information.