yugami
Aluminum
- Joined
- Aug 19, 2008
- Location
- Chicago, IL
I have a saw I purchased about a year ago and have stored since. Things are not going the direction I was planning on and need to part with it.
This was demonstrated under power when purchased, but I don't have a phase converter in the garage to do a full under power demonstration.
I cobbled together something with a VFD which allowed me to check the control was working properly but its too under powered to kick the motor into gear. The up/down clamp/unclamp programming all works.
Will require an extremely low trailer or lift gate or inventive mind. I moved it in with a hydraulic lowering trailer. No forklift available just a pallet jack and engine style hoist.
$4000 - located not far off 80/94 in Hammond, IN.
This was demonstrated under power when purchased, but I don't have a phase converter in the garage to do a full under power demonstration.
I cobbled together something with a VFD which allowed me to check the control was working properly but its too under powered to kick the motor into gear. The up/down clamp/unclamp programming all works.
Will require an extremely low trailer or lift gate or inventive mind. I moved it in with a hydraulic lowering trailer. No forklift available just a pallet jack and engine style hoist.
$4000 - located not far off 80/94 in Hammond, IN.