This saw works good. It is older, but pretty good shape. Hydraulics are quiet. Cuts dead straight. Includes original manuals and about a dozen brand new 1.25" Lennox variable pitch blades. I just bought a mitering auto saw for one of our products so this will need to go.
Max cut is 13.25" by 27"
Max feed stroke is about 24"
240 3 phase
Hydraulic blade tensioning
New inverter rated 7.5HP motor and VFD about 4 years ago.
Coolant
Easy to use manual or automatic.
Doesn't leak much hydraulic fluid.
This is not a programmable saw. No plc, no relays. Just a few switches and everything else is 100% hydraulic. You crank a handle to set the length and load your bars. There's a reason this saw still works good even though it was made in the 1960's.
Must be moved in 2 pieces. The shuttle table bolts to the saw, but I would not pick it this way.
Weighs around 4500 lbs.
$1750 loaded on your truck or trailer.
Max cut is 13.25" by 27"
Max feed stroke is about 24"
240 3 phase
Hydraulic blade tensioning
New inverter rated 7.5HP motor and VFD about 4 years ago.
Coolant
Easy to use manual or automatic.
Doesn't leak much hydraulic fluid.
This is not a programmable saw. No plc, no relays. Just a few switches and everything else is 100% hydraulic. You crank a handle to set the length and load your bars. There's a reason this saw still works good even though it was made in the 1960's.
Must be moved in 2 pieces. The shuttle table bolts to the saw, but I would not pick it this way.
Weighs around 4500 lbs.
$1750 loaded on your truck or trailer.