Credit card and other bills are piling up and my truck is misfiring and needs new heads and doesn’t seem to be spontaneously healing itself, so time to sell off some stuff:
Local pickup in Napa, California area.
You can email me at rpseguin -a- gma!l . c0m (obfuscated to avoid spam harvesters)
-Kurt D60 vises. Good condition, crank/travel smoothly. A few small drill/mill marks. $250 each with a handle
-Ramco 3 axis CNC mill, box ways, 5HP VFD driven spindle takes BT40 and CT40 tooling, Dynapath Delta 20 conversational control, RS232. Under power, works well. I like this mill. $4500 OBO
-Sharp HCV 2/3 axis CNC mill, also acts as a manual mill with 3 axis DRO
Beefier castings than a Bridgeport.
New, very good condition 3HP variable speed R8 head. Very quiet head.
$3900 OBO
Other machines I could sell:
-2010 Spinner SB, German made CNC lathe. Will do hard turning.
Fanuc 18iTB control
Box ways, Heidenhain high precision encoders
C axis
0-6000RPM spindle, 5C nosepiece and puller with Hardinge 2 3/16”-10TPI threaded nose, compact footprint.
-Hardinge HLV-H in good condition.
Dovetail bed is in very good condition.
Spindle runs true and quiet, 440V-480V.
Including some quality Hardinge/Lyndex/... 5C collets
Has taper attachment slide.
Purple Delrin is from teaching my kids:
(You can see/hear it running)
YouTube
-Webb/Whacheon 17”x40” gap bed lathe, Mori Seiki, runs well, 10” 3 jaw chuck, faceplate, 12” Kitagawa 4 jaw independent, quick change toolpost and holders, steadyrest, drill chuck, brand new speeds & feeds plate is on order and will come with the lathe
Local pickup in Napa, California area.
You can email me at rpseguin -a- gma!l . c0m (obfuscated to avoid spam harvesters)
-Kurt D60 vises. Good condition, crank/travel smoothly. A few small drill/mill marks. $250 each with a handle
-Ramco 3 axis CNC mill, box ways, 5HP VFD driven spindle takes BT40 and CT40 tooling, Dynapath Delta 20 conversational control, RS232. Under power, works well. I like this mill. $4500 OBO
-Sharp HCV 2/3 axis CNC mill, also acts as a manual mill with 3 axis DRO
Beefier castings than a Bridgeport.
New, very good condition 3HP variable speed R8 head. Very quiet head.
$3900 OBO
Other machines I could sell:
-2010 Spinner SB, German made CNC lathe. Will do hard turning.
Fanuc 18iTB control
Box ways, Heidenhain high precision encoders
C axis
0-6000RPM spindle, 5C nosepiece and puller with Hardinge 2 3/16”-10TPI threaded nose, compact footprint.
-Hardinge HLV-H in good condition.
Dovetail bed is in very good condition.
Spindle runs true and quiet, 440V-480V.
Including some quality Hardinge/Lyndex/... 5C collets
Has taper attachment slide.
Purple Delrin is from teaching my kids:
(You can see/hear it running)
YouTube
-Webb/Whacheon 17”x40” gap bed lathe, Mori Seiki, runs well, 10” 3 jaw chuck, faceplate, 12” Kitagawa 4 jaw independent, quick change toolpost and holders, steadyrest, drill chuck, brand new speeds & feeds plate is on order and will come with the lathe
Last edited: