What's new
What's new

For sale - haas vf2-ss

lael

Plastic
Joined
Oct 29, 2019
HAAS VF-2SS
approx 75 hours cut time
Super-Speed Vertical Machining Center; 30" x 16" x 20" (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55 gallon (208 liter) flood coolant system.
4th-Axis Drive and Wiring
Automatic Air Gun
Multi-Auger Chip Conveyor System; dual side augers and front discharge auger
Minimum Quantity Lubrication System; provides a small quantity of lubrication directly to the cutting tool.
Wireless Intuitive Probing System; Renishaw. Includes the Haas Visual Programming System,macros, spindle orientation, and coordinate rotation and scaling.
High speed machining

HAAS 4th Axis HRT210 - NEVER USED
210 mm (8.3") Servo Rotary Table.
Rotary Brake Booster for Haas rotary tables; provides up to 50% more brake torque

STALLION TRUNNION TABLE - NEVER USED
(2) .75" thick MIC 6 aluminum tooling plate with hardened bushings for 9/23/qc fixture
Hydraulic brake booster

Kurt 6” Crossover Vise
T slot toe clamp kit
Mitee bites T slot clamps
Vermont Gage pins .0610" - .2500" minus
Vermont Gage pins .0610" - .2500" plus
Vermont Gage pins .2510" - .5000" minus
Vermont Gage pins .2510" - .5000" plus
Grizzly Parallels 1/8"
Grizzly Parallels 1/2"
Shars Scale Magninier 7x21 10x21
Master Surface Roughness Comparator
MariTool Tool Probe Calibrator
Mahr Federal Master Ring Gage - work probe calibrator
Grizzly 1-2-3 Block Set
4-40 Thread Gage
10-32 Thread Gage
1/2-20 Thread Gage
M5x0.8 Thread Gage
M6x1 Thread Gage
6" Parallel Separator
Grizzly .0001" Resolution Test Indicator
Techniks ER16 High Precision Collet Set
Techniks ER32 High Precision Collet Set
3 additional 1/4", 2 additional 1/8" ER16 Collets
15.5" x 29" Aluminum Subplate with 1/2"x13 tapped holes on 2" centers

Tool Holders - USED
(2) CAT/ER COLLET CHUCK CAT 40 x ER 16A - 2.76"
(2) CAT/ER COLLET CHUCK CAT 40 x ER 16A - 4"
(1) CAT/ER COLLET CHUCK CAT 40 x ER 16A - 6"
(4) CAT/ER COLLET CHUCK CAT 40 x ER 32 - 2.76"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 1/4" - 3.00"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 3/8" - 3.00"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 1/2" - 3.00"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 5/8" - 3.00"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 3/4" - 3.50"
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 1" - 4.00"
(1) CAT FACE MILL ARBOR CAT 40 x FMA 3/4" - 1.37"
(1) CAT/SPU DRILL CHUCK ADAPTER CAT 40 x SPU 1/2" - 4"
Tool Holders - NEW
(1) CAT SIDE LOCK END MILL HOLDER CAT 40 x SLN 3/4" - 3.50"
(1) CAT/ER COLLET CHUCK CAT 40 x ER 32 - 4"
(1) CAT FACE MILL ARBOR CAT 40 x FMA 1" - 2.06"
Tools - USED
(1) 3/4" 3 flute 90 Degree Indexable Endmill with amuminum inserts - Widia - 4 used, 16 new inserts
(1) 2.0" 4 flute 45 Degree Indexable Facemill with aluminum inserts - Widia - 3 used, 17 new inserts
(1) 1/16" Flat Endmill 3 Flute 3/8" LOC 2.5" OAL Carbide - Kyocera
(1) 1/8" Flat Endmill 4 Flute 1/2" LOC 1.5" OAL Carbide - YG
(2) 3/16" Flat Endmill 4 Flute 5/8" LOC 2" OAL Carbide - YG
(2) 1/4" Flat Endmill 3 Flute 5/8" LOC 2.5" OAL Carbide - YG
(1) 1/4" Flat Endmill 4 Flute 3/4" LOC 2.5" OAL Carbide - SwiftCarb
(1) 1/4" Flat Endmill 4 Flute 1" LOC 3" OAL Carbide - YG
(1) 1/4" Bull Endmill 3 Flute 3/8" LOC 2" OAL R.030 Carbide - SwiftCarb
(1) 1/4" Bull Endmill 4 Flute 1" LOC 3" OAL R.030 Carbide - YG
(2) 1/2" Flat Endmill 4 Flute 1" LOC 3" OAL Carbide - YG
(1) 3/8" Flat Endmill 4 Flute 1" LOC 2.5" OAL Carbide - YG
(2) 3/8" Bull Endmill 4 Flute 1" LOC 2.5" OAL R.030 Carbide - YG
(1) 1/8" Engraving Bit - Micro 100
(1) #4-40 Form Tap - YG
(1) #10-32 Form Tap - YG
(2) M5x0.8 Tap - YG 1 M6x1 Tap - YG
(1) 1/4" Carbide Spot Drill 140 Degree - Monster Tool
(1) 1/4" 90 Degree Chamfer Mill
(1) #39 HSS Drill - YG
(1) #17 HSS Drill - YG
(1) #19 HSS Drill - YG
(1) #8 HSS Drill - YG
(1) 29/64 HSS Drill - YG
Tools - NEW
(1) 1" 3 flute 90 Degree Indexable Endmill with steel inserts - YG - 10 inserts 1
(1) 3" 7 flute 90 Degree Indexable Facemill with steel inserts - YG - 20 inserts 1
(1) 1/16" Flat Endmill 3 Flute 3/8" LOC 2.5" OAL Carbide - Kyocera 1
(4) 1/16" Flat Endmill 4 Flute 3/16" LOC 1.5" OAL Carbide - YG 4
(2) 1/8" Flat Endmill 4 Flute 1/2" LOC 1.5" OAL Carbide - YG 2
(3) 1/8" Bull Endmill 4 Flute 1/2" LOC 1.5" OAL R.030 Carbide - YG 3
(1) 3/16" Flat Endmill 4 Flute 5/8" LOC 2" OAL Carbide - YG 1
(3) 3/16" Bull Endmill 4 Flute 5/8" LOC 2" OAL R.030 Carbide - YG 3
(1) 1/4" Flat Endmill 4 Flute 3/4" LOC 2.5" OAL Carbide - SwiftCarb 1
(2) 1/4" Flat Endmill 3 Flute 5/8" LOC 2.5" OAL Carbide - YG 2
(2) 1/4" Flat Endmill 4 Flute 1" LOC 3" OAL Carbide - YG 2
(1) 1/4" Bull Endmill 3 Flute 3/8" LOC 2" OAL R.030 Carbide - SwiftCarb 1
(2) 1/4" Bull Endmill 4 Flute 1" LOC 3" OAL R.030 Carbide - YG 2
(2) 1/4" Bull Endmill 4 Flute .75" LOC 2.5" OAL R.060 Carbide - Monster Tool 2
(1) 1/4" Bull Endmill 3 Flute 1" LOC 2.5" OAL R.020 Carbide - Ultra Tool 1
(1) 6mm Bull Endmill 3 Flute 25mm LOC 63mm OAL R1.0 Carbide - Ultra Tool 1
(1) 3/8" Flat Endmill 4 Flute 1" LOC 2.5" OAL Carbide - YG 1
(2) 1/2" Bull Endmill 4 Flute 1.25" LOC 3.5" OAL Carbide - YG 2
(1) 1/2" Bull Endmill 5 Flute 1.25" LOC 3.0" OAL Carbide - Helical 1
(2) 1/4" 90 Degree Chamfer Mill 2
(1) 1/2" 90 Degree Chamfer Mill 1
(1) M5x0.8 Tap - YG 1
(4) M5x0.8 Form Tap - YG 4
(1) M6x1 Tap - YG 1
(4) M6x1 Form Tap - YG 4
(1) #10-32 Form Tap - YG 1
(2) 1/2-20 Tap - YG 2
(2) 1/2-20 Form Tap - YG 2
(9) #39 HSS Drill - YG 9
(9) #17 HSS Drill - YG 9
(4) #19 HSS Drill - YG 4
(4) #8 HSS Drill - YG 4
(5) 29/64 HSS Drill - YG 5
(10) 4.6MM HSS Drill - YG 10
(10) 5.6MM HSS Drill - YG 10
(5) 12.0MM HSS Drill - YG 5
(4) 1/4" Carbide Spot Drill 140 Degree - Monster Tool 4
(5) 3/8" Carbide Spot Drill 140 Degree - Monster Tool 5
(2) 1/4" Engraving Bit - Ultra Tool 2
 

Attachments

  • 20190524_121938.jpg
    20190524_121938.jpg
    91.9 KB · Views: 308
  • 20190524_122026.jpg
    20190524_122026.jpg
    92.5 KB · Views: 234
  • 20190524_150500.jpg
    20190524_150500.jpg
    100.9 KB · Views: 209
  • 20190524_121737.jpg
    20190524_121737.jpg
    92.4 KB · Views: 221
  • 20190524_121835.jpg
    20190524_121835.jpg
    86.4 KB · Views: 233
I'm interested in the #39 HSS Drill, how much do you want for it?
 
FWIW, the 210 rotary is awful big for a VF2. We have the 160 on one of our VF2's and it is kind of big, takes up a chunk of Z room, and with the sidemount changer and a long tool, I would make sure to use an alias M code to make sure you could not do a tool change while over the rotary.
 








 
Back
Top