dieselfitter
Plastic
- Joined
- Sep 22, 2015
Sanford SG-48 Surface Grinder $700
4" x 8" table travel with a 6" vertical wheel movement. It is a bench model but has a stand. It weighs165 lbs, has a small footprint and can be moved around easily. The machine is in good operating condition. The spindle bearings have no play and turn smoothly. It is powered by a 115 volt motor.
Included with grinder are toolmakers vise, spare belt, stand, diamond wheels and regular grinding wheels.
This machine is especially useful for sizing and dressing small parts, bearing spacers, chuck jaws, setup blocks...
Knife makers use these to make their blades flat and parallel.
With a spin fixture indexing fixture it is possible to sharpen end mills and c-bores.
Included are diamond wheels for sharpening carbide cutting tools.
With a universal collet/V block fixture it is possible to camshafts and crankshafts for miniature engines.
Tim 65l-983-433l
4" x 8" table travel with a 6" vertical wheel movement. It is a bench model but has a stand. It weighs165 lbs, has a small footprint and can be moved around easily. The machine is in good operating condition. The spindle bearings have no play and turn smoothly. It is powered by a 115 volt motor.
Included with grinder are toolmakers vise, spare belt, stand, diamond wheels and regular grinding wheels.
This machine is especially useful for sizing and dressing small parts, bearing spacers, chuck jaws, setup blocks...
Knife makers use these to make their blades flat and parallel.
With a spin fixture indexing fixture it is possible to sharpen end mills and c-bores.
Included are diamond wheels for sharpening carbide cutting tools.
With a universal collet/V block fixture it is possible to camshafts and crankshafts for miniature engines.
Tim 65l-983-433l