Sanford SG-48 Surface Grinder, MPLS MN
Close
Login to Your Account
Results 1 to 8 of 8
  1. #1
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Minnesota
    Posts
    22
    Post Thanks / Like
    Likes (Given)
    11
    Likes (Received)
    5

    Default Sanford SG-48 Surface Grinder, MPLS MN

    Sanford SG-48 Surface Grinder $700
    4" x 8" table travel with a 6" vertical wheel movement. It is a bench model but has a stand. It weighs165 lbs, has a small footprint and can be moved around easily. The machine is in good operating condition. The spindle bearings have no play and turn smoothly. It is powered by a 115 volt motor.
    Included with grinder are toolmakers vise, spare belt, stand, diamond wheels and regular grinding wheels.
    This machine is especially useful for sizing and dressing small parts, bearing spacers, chuck jaws, setup blocks...
    Knife makers use these to make their blades flat and parallel.
    With a spin fixture indexing fixture it is possible to sharpen end mills and c-bores.
    Included are diamond wheels for sharpening carbide cutting tools.
    With a universal collet/V block fixture it is possible to camshafts and crankshafts for miniature engines.
    Tim 65l-983-433l
    sg481.jpgsg482.jpgsg483.jpgsg484.jpg

  2. #2
    Join Date
    Oct 2005
    Country
    UNITED STATES
    State/Province
    Colorado
    Posts
    1,398
    Post Thanks / Like
    Likes (Given)
    425
    Likes (Received)
    396

    Default

    A bit far for me but gotta know, what are you asking for it?

  3. #3
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Minnesota
    Posts
    22
    Post Thanks / Like
    Likes (Given)
    11
    Likes (Received)
    5

    Default

    oops, forgot to post the price. $700.

  4. #4
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Minnesota
    Posts
    22
    Post Thanks / Like
    Likes (Given)
    11
    Likes (Received)
    5

    Default

    Well, that didn't take long.
    Thanks for looking. The item is sold.

  5. Likes michiganbuck liked this post
  6. #5
    Join Date
    Oct 2017
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    just a quick heads up folks, some guys been trying to work out a "deal" with me, he used this posts description, no hes not the buyer, I called tim the seller here, my first clue to check said bad guy out was when he got suddenly confrontational when i asked for him to take a phone vid of the spindle running so i could listen for bearing issues..and asked for him to send photos of the crating before taking it to fastenal. he kinda got REALLY wonky. so be careful out there, theres someone pulling images and trying to scam people

  7. #6
    Join Date
    Jun 2012
    Location
    Asheville, NC
    Posts
    169
    Post Thanks / Like
    Likes (Given)
    72
    Likes (Received)
    48

    Default

    Quote Originally Posted by reddogforge View Post
    just a quick heads up folks, some guys been trying to work out a "deal" with me, he used this posts description, no hes not the buyer, I called tim the seller here, my first clue to check said bad guy out was when he got suddenly confrontational when i asked for him to take a phone vid of the spindle running so i could listen for bearing issues..and asked for him to send photos of the crating before taking it to fastenal. he kinda got REALLY wonky. so be careful out there, theres someone pulling images and trying to scam people
    Where did this take place? Here or on another forum or some social media site?

  8. #7
    Join Date
    Jun 2012
    Country
    UNITED STATES
    State/Province
    Michigan
    Posts
    9,673
    Post Thanks / Like
    Likes (Given)
    3282
    Likes (Received)
    3462

    Default

    re:[take a phone vid of the spindle running so i could listen for bearing issues..]

    Good for him, smart thinking...
    But wait is it sold or not at this time..No to far for me but a nice looking machine.

  9. #8
    Join Date
    Jul 2006
    Location
    Hillsboro, New Hampshire
    Posts
    6,517
    Post Thanks / Like
    Likes (Given)
    1552
    Likes (Received)
    4530

    Default

    Quote Originally Posted by michiganbuck View Post
    re:[take a phone vid of the spindle running so i could listen for bearing issues..]

    Good for him, smart thinking...
    But wait is it sold or not at this time..No to far for me but a nice looking machine.
    OP is from 2016, MB. But it would be interesting to hear where the scam attempt was posted.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •