JP Machining
Stainless
- Joined
- Jul 15, 2006
- Location
- Wisconsin
Selling a Sunnen Hone Model 1290D. Missing rear tank cover and needs a new dial as old one lost lens and face is bare. Currently on a pallet and shrink wrapped in storage, need it gone.
Tooling included;
2.355-2.500 2H-P28-2375WG
The other mandrels that have numbers are ;
1.177-1.250 AK20-1187UE
.990-1.062 AK20-1000UD
.744-.775 AK20-744UA
.370-.385 K12-370AH
.245-.250 K8-245AH
A couple that don't have numbers on them, measure as about;
.600"
.300"
.275"
As far as I can tell there are wedges and adpaters for all the mandrels listed. There are several stones as well, but might not be one for every mandrel. There are a couple truing sleeves as well.
Asking $850 OBO, I will be putting it up on ebay before long as well.
Tooling included;
2.355-2.500 2H-P28-2375WG
The other mandrels that have numbers are ;
1.177-1.250 AK20-1187UE
.990-1.062 AK20-1000UD
.744-.775 AK20-744UA
.370-.385 K12-370AH
.245-.250 K8-245AH
A couple that don't have numbers on them, measure as about;
.600"
.300"
.275"
As far as I can tell there are wedges and adpaters for all the mandrels listed. There are several stones as well, but might not be one for every mandrel. There are a couple truing sleeves as well.
Asking $850 OBO, I will be putting it up on ebay before long as well.