Traub TLN 26 2006 swiss with 2006 FMB MODEL TURBO 5-42 Barfeed
Close
Login to Your Account
Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2011
    Country
    UNITED STATES
    State/Province
    Oregon
    Posts
    464
    Post Thanks / Like
    Likes (Given)
    124
    Likes (Received)
    264

    Default Traub TLN 26 2006 swiss with 2006 FMB MODEL TURBO 5-42 Barfeed

    Purchased this at an auction along with another CNC machine I wanted today. This one I bought on more of a whim as the price was cheap and it will finish off a truck load and I have been pushing myself to increase automation in my shop. Before I deal with rigging and shipping and that headache I thought I would see if anyone closer by was interested. Sold as is where is. Indianapolis, Indiana. Machine will be about $1k to put on a truck according to the rigger. You would pay this in addition to the machine price.

    I was not on site so I don't know a ton about the machine.

    Will bring in and use it if it does not get any interest.

    Looking to get 12k for the pair.



    I am assuming that it works but no guarantees as anyone who has purchased at an auction knows.

    See links.

    { Group of lots: 710, 711 } 2006 TRAUB TNL-26 SWISS TYPE CNC SCREW MACHINE; TX-8I CONTROL, COLLE

    { Group of lots: 710, 711 } 2006 FMB MODEL TURBO 5-42/4200/C MAGAZINE BAR FEED; S/N 66-111943

  2. #2
    Join Date
    Aug 2018
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    5
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Contact information [email protected] Canton,OH let’s talk.

    Quote Originally Posted by pmtool View Post
    Purchased this at an auction along with another CNC machine I wanted today. This one I bought on more of a whim as the price was cheap and it will finish off a truck load and I have been pushing myself to increase automation in my shop. Before I deal with rigging and shipping and that headache I thought I would see if anyone closer by was interested. Sold as is where is. Indianapolis, Indiana. Machine will be about $1k to put on a truck according to the rigger. You would pay this in addition to the machine price.

    I was not on site so I don't know a ton about the machine.

    Will bring in and use it if it does not get any interest.

    Looking to get 12k for the pair.



    I am assuming that it works but no guarantees as anyone who has purchased at an auction knows.

    See links.

    { Group of lots: 710, 711 } 2006 TRAUB TNL-26 SWISS TYPE CNC SCREW MACHINE; TX-8I CONTROL, COLLE

    { Group of lots: 710, 711 } 2006 FMB MODEL TURBO 5-42/4200/C MAGAZINE BAR FEED; S/N 66-111943
    Contact me at above email please.

  3. #3
    Join Date
    Oct 2005
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    15,542
    Post Thanks / Like

    Default

    Quote Originally Posted by pmtool View Post

    Looking to get 12k for the pair.



    I am assuming that it works but no guarantees as anyone who has purchased at an auction knows.

    See links.

    { Group of lots: 710, 711 } 2006 TRAUB TNL-26 SWISS TYPE CNC SCREW MACHINE; TX-8I CONTROL, COLLE

    { Group of lots: 710, 711 } 2006 FMB MODEL TURBO 5-42/4200/C MAGAZINE BAR FEED; S/N 66-111943
    I followed the links but the price didn't show up.

  4. #4
    Join Date
    Jul 2011
    Country
    UNITED STATES
    State/Province
    Oregon
    Posts
    464
    Post Thanks / Like
    Likes (Given)
    124
    Likes (Received)
    264

    Default

    To be clear I bought it at the original auction for less than I am asking. They are still onsite in Indianapolis. Originally bought it with the intention of using it and will still if there is no interest but also purchased another machine in the same auction that is a little more in my comfort zone. I am a little worried about Traub support out here on the west coast. Looks like they are much more common in the Midwest. Still looking into that.

    If it is a good fit for someone and I make a few bucks and don't have to deal with it, win win.

    So I am seeing if anyone wants to buy it from me and pick it up in Indiana. Rigger lists $850 to disconnect everything, drain oil etc. and load on a truck. It is a big project so purchaser would have to work with riggers time frame.

  5. Likes digger doug liked this post
  6. #5
    Join Date
    Feb 2012
    Location
    Indiana
    Posts
    49
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    18

    Default

    I'll pay the $1k rigger fee if nobody else steps up. Not meaning to be rude, but if you're risking storage fees just let me know. I thought the Fadal guy nearby would take me up on the same offer last year but he found some guy to take it off his hands. Hope you can do the same!

  7. #6
    Join Date
    Jul 2011
    Country
    UNITED STATES
    State/Province
    Oregon
    Posts
    464
    Post Thanks / Like
    Likes (Given)
    124
    Likes (Received)
    264

    Default

    I have no problems moving it. Just seeing if I could make some quick $ with little effort off the deal. Looking like I am going to bring it in my shop and see if I can't find some work to fit it as well as shift some of the smaller parts I run on to it. Embarrassingly simple parts for machine like this but still would run faster and in a single operation. I talked a dealer who specialized swiss and high productivity lathes and they figured they could probably sell it consignment off my floor with no tooling for 2 or 3 times what I was asking here assuming it is under power and working. Will go that route if I don't utilize it enough to justify the crazy floor space it takes up. So no way I am selling it for rigging fees

  8. #7
    Join Date
    Oct 2009
    Location
    Oregon
    Posts
    4,300
    Post Thanks / Like
    Likes (Given)
    4610
    Likes (Received)
    2202

    Default

    If it's any help, PMtool is a great person to deal with. Stand up guy, Knows his stuff, I wouldn't hesitate to buy a machine from him.

  9. #8
    Join Date
    Apr 2005
    Location
    Beaverdam, Virginia
    Posts
    7,430
    Post Thanks / Like
    Likes (Given)
    698
    Likes (Received)
    3508

    Default

    I don't know anything about Traub machines but a little Googling tells me that price is so ridiculously cheap it sends up red flags. The pictures aren't good enough to make much out. I hope someone didn't cannibalize it to keep it's neighbor running. Knowing other brands of Swiss of the age with the bells and whistles that thing has I would think that machine in nice running condition with a bar feed would bring at least $40k.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •