Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hi , does anyone has maybe a manual/exploded view/partslist of a
Ageha-Zeatz PHV250 rotary table ?
I can't get the wormshaft out,which I need to do to get the table out so I can fix the locking mechanism.
Any help/suggestions would be greatly appreciated !View attachment 239009View attachment 239010
Can you post the manual or any info on how to adjust the handle on the Zeatz pin 320?I can’t get the link to open. Thanks
Can you post the manual or any info on how to adjust the handle on the Zeatz pin 320?I can’t get the link to open. Thanks
HI Jack thanks for the reply.I had a typo above.I have purchased a Royal/Zeatz PHVGI 320 made in Spain.It is horizontal & verticle 12”.The table is mark free great shape,no rust,locks & turns fine but appears to have no oil in sight glass & handle has about 1/3 of a turn of movement when switching from cw to ccw.I thought I would take apart and clean & see if I could get some slop out of handle if I could & fill with oil.How How does it come apart? Thanks Tim
Strange, i posted a post and its not there
Thanks Jack that is great info.I assume the table should come off first right? Is the nut RH or LH? I think my clockhouse is stuck I can’t rotate it to disengage, probably from no oil.Any other photos or info will be great.thanks
Hi TCMACH3 ad all others,
no the table goes of in second place, first you have to get out the worm gear clock house assembly,
hmm, you have the same problem as i had, i will make a few pics tomorrow with text then you have a real how to.
Its not a big deal, leave everything together for now, cause only the handle, the scissor and the divider-plate will
have to be disassembled.
Now it is night over here, so you have a look tomorrow and then you will be fine,
to you all, cheers.
I got my shaft assembly out,took all apart and cleaned everything,put a new o- ring on it & put back together.I used fine sandpaper and sanded the outside & honed the bore on the housing.I put the worm gear assembly back in & it rotates to engage -disengage freely now.I will take the table off later & clean it up.Thanks for the info it saved me a lot of time trying to figure out how to take apart.
Notice
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.