Bandsaw blade

Joe Miranda · May 17, 2022

I have a bandsaw blade that came with a machine we purchased but it is too aggressive for us. It is 11' x 1.06 x .035 and it is 4tpi. Cost is you pay shipping. It was used exactly one time. I don't know the brand. It came standard on a Clausing bandsaw we bought.

gbent · May 17, 2022

Thats very generous, to bad my saw requires a longer blade. IMO, there is rarely a to course blade, only a poorly performing hydraulic downfeed system.

Joe Miranda · May 17, 2022

It would probably work fine, and this new Clausing has awesome downfeed, but since the saw is available to the gen pop I am afraid someone will put something that has a small cross section in it and let the saw feed at full gravity speed and end up launching it across the room (and there is a window opposite the saw).

Froneck · May 18, 2022

I'm interested, my machine takes 11" x .035 blade but at 3/4". Uses carbide guides, DoAll C-4 but I have used 1" a few times. I don't know what I'm doing in the new format, I thought I would message you but used start a conversation what ever that is! Would be nice if management explained the changes.

Froneck · May 19, 2022

e-mail me at [email protected] if you still want to get rid of the blade.

Joe Miranda · May 23, 2022

Hi Froneck - I have one guy ahead of you but if he backs out I will get back to you.

Search

Largest Manufacturing Technology Community on the Web

Search

Bandsaw blade

Joe Miranda

Titanium

Attachments

gbent

Diamond

Joe Miranda

Titanium

Froneck

Titanium

Froneck

Titanium

Joe Miranda

Titanium

Similar threads