PeterH48
Aluminum
- Joined
- May 3, 2006
- Location
- New England
Looking for a manual for my Boyer Schultz surface grinder. Mine is a 618-H, not to be confused with an H618 which is a different machine. There is a Boyer&Shultz manual here on the site, but the link is dead and does not work. Mine has a fully hydraulic table with the tank and pump built into the machine base cabinet. It also is v-belt driven off a pulley on the back of the spindle. The motor is mounted in the lower rear machine cabinet. Even a manual that is not the same as mine, but similar in design would be a big help. Always searching on ebay, but so far nothing close has come up.