Tool Identification Help
Close
Login to Your Account
Likes Likes:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Washington
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Tool Identification Help

    Hi all, this is my first post here so apologies if I do something incorrectly.

    I had the opportunity this past weekend to snap up a retired tool & die maker's toolboxes. There's an old school mid box and two of the larger top boxes, and I've been sorting through them the past couple of evenings and reorganizing.

    I've got most everything identified, but there are a handful of things I've never seen before and don't know how to go about ID'ing.

    I took some pics of the tools in question next to a scale, and appreciate any help you folks can offer!

    Photo album

  2. #2
    Join Date
    Nov 2006
    Location
    Bowling Green, Ohio
    Posts
    342
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    120

    Default

    The brass handled tool is a screw starter. Pressed into the screw slot, it will hold the screw to start the threads.

    Bob
    WB8NQW

  3. #3
    Join Date
    Aug 2015
    Country
    UNITED STATES
    State/Province
    Illinois
    Posts
    1,388
    Post Thanks / Like
    Likes (Given)
    994
    Likes (Received)
    595

    Default

    The only items I could identify were laps and the tool to expand them. Last 3 photos.

  4. #4
    Join Date
    Mar 2011
    Location
    Geneva Illinois USA
    Posts
    6,168
    Post Thanks / Like
    Likes (Given)
    2627
    Likes (Received)
    2391

    Default

    #1 is a plug cutter, 3a and 5 look like hollow mills, 4 and 6 look like some kind of scribing tool.

    Tom

  5. #5
    Join Date
    May 2005
    Location
    Interior British Columbia
    Posts
    2,270
    Post Thanks / Like
    Likes (Given)
    235
    Likes (Received)
    689

    Default

    Quote Originally Posted by TDegenhart View Post
    #1 is a plug cutter, 3a and 5 look like hollow mills, 4 and 6 look like some kind of scribing tool.

    Tom
    The hollow mills look like cutters for taking the heads off some specialty aircraft fasteners. The little stepped reamers, same gig, I think, airplane style special fastener hole prep stuff.

  6. #6
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Washington
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Awesome, thank you (everyone else too). That makes perfect sense - the previous owner was employed in the aerospace sector.

  7. #7
    Join Date
    Oct 2010
    Location
    Moscow,Idaho,USA
    Posts
    1,189
    Post Thanks / Like
    Likes (Given)
    1342
    Likes (Received)
    571

    Default

    #2 is a depth rod for a height gage.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •