Pulled Port or T-Drill Method are fine.
Anybody here interested in quoting tubing work?
Its sanitary type tubing (304 SS, polished OD x id) with a smaller diameter “pulled port”, for an existing mature product line.
For instance, our 1” valve bodies have a main body of 1-1/2” OD x .065 wall with a pulled port of 1” OD. There’s a series of these I use in our valve line, its repeat work, we do a fair quantity of valves yearly. Typical lot, order sizes are 25 to 100 of each.
The complete valves can be seen on our web site www.keyhigh.com.
Drawings are in AutoCAD format if anybody is interested.
My e-mail is [email protected]
Anybody here interested in quoting tubing work?
Its sanitary type tubing (304 SS, polished OD x id) with a smaller diameter “pulled port”, for an existing mature product line.
For instance, our 1” valve bodies have a main body of 1-1/2” OD x .065 wall with a pulled port of 1” OD. There’s a series of these I use in our valve line, its repeat work, we do a fair quantity of valves yearly. Typical lot, order sizes are 25 to 100 of each.
The complete valves can be seen on our web site www.keyhigh.com.
Drawings are in AutoCAD format if anybody is interested.
My e-mail is [email protected]
