Wolfram Malukker
Plastic
- Joined
- Jan 19, 2019
First-run parts. Hopefully quantities will go up from here, but to start with I need 20pcs. My mill is booked, local guys are covered up, maybe someone here wants some small parts.
Part is milled from 1018 steel, Solidworks and .igs models are available, lead time 3-5 weeks. Also looking at investment casting to near net shape.
Part has one 7mm drilled/reamed hole and 2 2mm outside corners radiused. 5/64" corner radius is fine.
View attachment Rear Takedown Blockinches.zip
File is a DWG once unzipped, dimensioned in inches. Part is modeled in MM and both inch and mm drawings are available.
Part is milled from 1018 steel, Solidworks and .igs models are available, lead time 3-5 weeks. Also looking at investment casting to near net shape.
Part has one 7mm drilled/reamed hole and 2 2mm outside corners radiused. 5/64" corner radius is fine.
View attachment Rear Takedown Blockinches.zip
File is a DWG once unzipped, dimensioned in inches. Part is modeled in MM and both inch and mm drawings are available.