What's new
What's new

RFQ- 14 gauge SS plate aprox. 8 x 14" with a few holes laser or water jet

Milacron

Administrator
Staff member
Joined
Dec 15, 2000
Location
SC, USA
Probably not cost effective as I only need 1...but throwing this out there to see... stainless should be fine polished or mirror finish. Tolerance =/- .004" (is that realistic for this ?)

latheplate.jpg

Contact - [email protected]
 
I can usually hold -.000/+.003 on the waterjet if really necessary. Roundness can be an issue if the sheet moves a tiny bit from the splash back. Its a light sheet, not 1" plate.
It would be around $125, if you drop ship a sheet from mcmaster, and have a dxf file so I don't have to redraw it.
Maxwell
MJS Engineering inc
 
Hi Don,

+/- .010" is more realistic. For you I'll waterjet one from #8 (mirror) finish for $130 to cover the cost of material and shipping and basically cut it for free.

Robert
 








 
Back
Top