This is a bit unconventional, but wondering if anyone would be interested in machining this brand? No print, but it's all drawn up and I have remote access to the Mastercam file. It's programmed for a .011" carbide end mill, but could probably use some touching up, and working on it remotely is far too slow. Could send Z2G if you're working on 2017 or newer. The stock is 1" x 1" x 1", mild steel. No real tolerance to speak of. Not looking for many of these - maybe 3 or 4. Don't know if I'm missing any other details, but it's pretty gravy. Send me a PM if interested.