Chris Attebery
Cast Iron
- Joined
- Jun 14, 2002
- Location
- Gilroy, CA, USA
Hello,
I have a side business with a few products. My day job is getting busier and I just don't have as much time for machining as I used to. I have a couple products that will need parts soon. I've been making them on a CNC converted Grizzly benchtop mill using Fusion360 for design and CAM. I can provide DXF files if you don't use F360.
I'm looking for someone who can do small batches of parts every few months.
I'd need 10 pairs of these end brackets. They are machined from .75" x 1.75" 6061 bar.
I'd need 150 of these brackets. They are machined from 1" x 1" aluminum angle.
This is an alternate design to the second bracket. These are machined from .625" x 1.25" 6061 bar.
Please PM me if you're interested.
Thanks,
Chris
I have a side business with a few products. My day job is getting busier and I just don't have as much time for machining as I used to. I have a couple products that will need parts soon. I've been making them on a CNC converted Grizzly benchtop mill using Fusion360 for design and CAM. I can provide DXF files if you don't use F360.
I'm looking for someone who can do small batches of parts every few months.
I'd need 10 pairs of these end brackets. They are machined from .75" x 1.75" 6061 bar.
I'd need 150 of these brackets. They are machined from 1" x 1" aluminum angle.
This is an alternate design to the second bracket. These are machined from .625" x 1.25" 6061 bar.
Please PM me if you're interested.
Thanks,
Chris