RFQ: Low-Volume Swiss/Screw-Machine Parts (17-4, 304, PEEK materials)
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2009
    Apex, NC
    Post Thanks / Like
    Likes (Given)
    Likes (Received)

    Default RFQ: Low-Volume Swiss/Screw-Machine Parts (17-4, 304, PEEK materials)

    We would like to obtain quotes for 100 of the attached parts (feel free to quote other quantities up to 1000 pieces):
    >The material for the screw-remover and torque-driver-shaft is 17-4 ph H900 or H1025 (or heat-treated to 35-45 RC, will consider 440c); the drawing has not been updated (note the collar part is PEEK, and the scan-body is 300-series).
    >Please only respond if all the parts can be quoted and made to print (if there are slight changes to aid fabrication, or tolerance heartburn, we will certainly entertain that); they can all be made on a swiss-cnc, and I am not interested in doing these piecemeal, or with methods not representative or suitable to hold all the tolerances (we have made manual prototypes here).
    >Please provide best lead-time for all parts.
    >Please no broker-services or out-of-country solicitations (will not respond)
    >Please reply with contact name (first name is fine), email and phone (will not respond otherwise).I will acknowledge receipt and post here or inform folks of the status.

    Thanks very much for your time.


Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts