Looking for someone who can precision grind a B&S#9 taper from MT#4 taper ER collet holder.
I will supply the MT#4 collet holder. Need the runout to be less than .001.
Specs on the taper are as follows:
Taper Large End Small End Angle From Center
MT#4 1.2310 1.0200 1.4876
B&S#9 1.0775 0.9001 1.1955
Thank you
I will supply the MT#4 collet holder. Need the runout to be less than .001.
Specs on the taper are as follows:
Taper Large End Small End Angle From Center
MT#4 1.2310 1.0200 1.4876
B&S#9 1.0775 0.9001 1.1955
Thank you