RFQ One-off Small threaded steel part (barrel nut)
Close
Login to Your Account
Results 1 to 8 of 8
  1. #1
    Join Date
    Sep 2020
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default RFQ One-off Small threaded steel part (barrel nut)

    Quote accepted. RFQ closed. Thank you!

    First post and serious apologies for bad/incorrectly expressed information. I need to make a new barrel nut for a Ruger Precision Rifle.

    I'm looking for a steel part much like (not exactly the same as) the picture attached. Material choice is flexible but needs to hold 40 pounds of torque and not change much with heat. Preferably made out of stainless (recommendations accepted) but I'd take any steel that will hold.

    Dimensions:
    0.64" tall
    Outer Threads: 1.250 x 18

    Inner Threads I can't say for certain but they need to thread onto the following:
    1.0 – 16 UN3A (this may just be it - I'm sooper dum about this stuff)
    MAJ: 1.0 - .9906
    Pitch: .9594 - .9557
    Minor: .9255 Min

    The hex on the top measures 1.095" across the flat but it doesn't really matter as long as I have a flat surface to grab onto and the threads protrude past any edge so I could thread on from either side

    The height of the Hex is 0.29" leaving 0.35" of thread on the outside however, there is a smooth section at the base of the threads as you can see in picture 2 (I'm sure it has a term) that's 0.05" tall.

    So, I apologize again for bad terminology and descriptions but I'm sure this is a part that a machinist could crush.


    Additionally, a crows foot wrench that is no more than 0.29" thick with a 3/8 cutout for a torque wrench that fits the hex/flat part and doesn't fold like a bad poker hand would be extremely beneficial too.

    Thank you!

    untitled-1.jpg
    sdff.jpg
    Last edited by ChrisMiedel; 09-10-2020 at 09:50 AM. Reason: Request Filled

  2. #2
    Join Date
    Oct 2005
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    19,140
    Post Thanks / Like

    Default

    Isn't that a simple catalog item from the OEM ?

  3. #3
    Join Date
    Sep 2020
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default

    Unfortunately no. Ruger will not sell their barrel nut and this one (a custom one) is no longer being manufactured. It's a really stupid situation I would absolutely avoid if possible.

  4. Likes digger doug liked this post
  5. #4
    Join Date
    Oct 2020
    Country
    UNITED STATES
    State/Province
    Tennessee
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Have you found anyone to make you part yet?

  6. #5
    Join Date
    Apr 2005
    Location
    Beaverdam, Virginia
    Posts
    9,310
    Post Thanks / Like
    Likes (Given)
    1201
    Likes (Received)
    4759

    Default

    Quote Originally Posted by RoundHouse M&F View Post
    Have you found anyone to make you part yet?
    RE-read the first post.

  7. #6
    Join Date
    Aug 2012
    Location
    California, Central Coast
    Posts
    4,829
    Post Thanks / Like
    Likes (Given)
    2342
    Likes (Received)
    1960

    Default

    Quote Originally Posted by ChrisMiedel View Post
    Quote accepted. RFQ closed. Thank you!
    The better way to let everyone know you dont need this anymore would be to also make a new post saying so. Sometimes the first post is not re read if someone read it before....

  8. Likes Ox liked this post
  9. #7
    Join Date
    Apr 2005
    Location
    Beaverdam, Virginia
    Posts
    9,310
    Post Thanks / Like
    Likes (Given)
    1201
    Likes (Received)
    4759

    Default

    Quote Originally Posted by Rob F. View Post
    The better way to let everyone know you dont need this anymore would be to also make a new post saying so. Sometimes the first post is not re read if someone read it before....
    You can't be serious, this thread is a month old.The OP coming back and saying the job was awarded is better than most do.

  10. #8
    Join Date
    Aug 2012
    Location
    California, Central Coast
    Posts
    4,829
    Post Thanks / Like
    Likes (Given)
    2342
    Likes (Received)
    1960

    Default

    Quote Originally Posted by Dualkit View Post
    You can't be serious, this thread is a month old.The OP coming back and saying the job was awarded is better than most do.
    I realize that. It is easy to scan over text to look at pics or drawings, I missed it, maybe because it is same bold font as the title so brain just automatically dismissed it? IDK.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •