Hi All,
I am looking to build a pressure housing for an underwater piece of electronics. My design is based off of a schedule-80 6061 4 inch pipe 16 inches long. Each end of the housing is machined for an o-ring sealed endcap and there is a CNC milled aluminum mounting tray with some milled mounting hardware inside. the whole unit is a little over 17 inches long, and consists of 11 distinct pieces. All exterior pieces will be hard-anodized, and the interior pieces can be color-anodized. PM me for drawings and step files.
Thanks,
Jim
I am looking to build a pressure housing for an underwater piece of electronics. My design is based off of a schedule-80 6061 4 inch pipe 16 inches long. Each end of the housing is machined for an o-ring sealed endcap and there is a CNC milled aluminum mounting tray with some milled mounting hardware inside. the whole unit is a little over 17 inches long, and consists of 11 distinct pieces. All exterior pieces will be hard-anodized, and the interior pieces can be color-anodized. PM me for drawings and step files.
Thanks,
Jim