We have a 15ish year old Crown WP2300 and we are looking to add an onboard charger. It doesn't see much use at all, so the idea is that we can just have this thing plugged in when not in use to keep battery trickled up and get rid of the large standard charger.
Electrical goes battery-->Fuse-->Controller.
I plan to set it up as battery-->charger-->fuse-->controller.
I just want to be sure we aren't going to destroy the controller by doing this (without any disconnect during charging). I assume the max voltage leaving the charger will be 29v or so...
Any comments?
Electrical goes battery-->Fuse-->Controller.
I plan to set it up as battery-->charger-->fuse-->controller.
I just want to be sure we aren't going to destroy the controller by doing this (without any disconnect during charging). I assume the max voltage leaving the charger will be 29v or so...
Any comments?