I have a 9 x 13 tank coming with a piece of equipment this weekend. It is set to arrive on Sunday so I am trying to plan offloading without any outside assistance. Most components are broken down into manageable parts for shipping, but the tank being 9x13 could potentially pose a problem.
I am trying to work out in my head how to rate the capacity of a forklift if the load is being supported by another forklift on the opposite side. I want to think that the fork trucks could carry full capacity in this configuration since the load is supported on each end from leaning off center. Just looking for anyones input on this before we get it up in the air, and pull the trailer out from under it. Thanks.
I am trying to work out in my head how to rate the capacity of a forklift if the load is being supported by another forklift on the opposite side. I want to think that the fork trucks could carry full capacity in this configuration since the load is supported on each end from leaning off center. Just looking for anyones input on this before we get it up in the air, and pull the trailer out from under it. Thanks.