What's new
What's new

Hyster H200HS Forklift Transmission problem.

134PAUL

Plastic
Joined
Oct 2, 2019
I have recently purchased an old Hyster H200HS C7S-1553A Forklift. It has the 'monotrol' on the throttle and a gear selector lever to the left of the steering wheel that operates a spool valve on the transmission with 4 detent positions.

If I select the furtherest forward position the forklift moves forward, the 2 middle positions it actually locks up, the furtherest back it moves forward.

The monotrol seems to be not working as it will only go forwards even when reverse is selected. I loosened the 3 pipes on the monotrol, the oil flow seems to change from one to the other when forwards/reverse is selected and oil flows out of the supply pipe all the time.

Has anyone got info/parts/service manuals on these transmissions? Some info on clutch pressures etc would be very helpful.

I suspect a clutch pack may be locked up/worn out.

Thank You.
 
Sounds like forward and reverse are engaging at the same time. But, I don't have any info on the trans. My forklift dealer has always been very helpful with info.
 
Thank You Keyster, that diagram was very helpful.

Has anyone got a parts diagram for this transmission?

Thanks.
 








 
Back
Top