ratbldr427
Titanium
- Joined
- Mar 21, 2006
- Location
- jacksonville,fl.
We have been upgrading some of our equipment and received two new die cutters.MASTERCUT 145 PER - Autoplaten(R) die-cutter - Overview '|' BOBST.
We had put two in the last few years to replace some older models. These will replace another two.They are not much faster but are completely redesigned.
The first one they had some difficulty lifting it off the flat bed.It takes 3 trailers for each machine.
I cant get the viedo to load,however the riggers used this lift and another smaller one to lift the platen and drive the trailer out from under. The large Versalift was tipped up with the movable counter weight fully extended. The Versalift also had a remote control unit.
When I first looked out back and didn't see the driver and the ass end up in the air I was thinking this don't look good. The riggers had it under control and when the second one arrived they decided not to take any chanches.
We had put two in the last few years to replace some older models. These will replace another two.They are not much faster but are completely redesigned.
The first one they had some difficulty lifting it off the flat bed.It takes 3 trailers for each machine.
I cant get the viedo to load,however the riggers used this lift and another smaller one to lift the platen and drive the trailer out from under. The large Versalift was tipped up with the movable counter weight fully extended. The Versalift also had a remote control unit.
When I first looked out back and didn't see the driver and the ass end up in the air I was thinking this don't look good. The riggers had it under control and when the second one arrived they decided not to take any chanches.