RustyRedneck
Aluminum
- Joined
- Feb 17, 2016
Hey fellas, Just curious if any of you could help. I went out to the shop and tried to fire up the Mazak YMS H25Q. When I fired it up it showed alarm number 9: Detecting No Signal X-Axis. It says in the book that this means there's no signal coming back from the X-axis resolver. Where do I start? I took the connection apart on the encoder on the back of the X-Axis servo and put it back together thinking there might be a bad connection and taking it apart and putting it back together will fix it. I don't know how to test the encoder or if I can. It's never acted up before for me. I have access to a multi-meter. Any help is greatly appreciated. Thanks!