Crash cart out for qt18
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Feb 2013
    Post Thanks / Like
    Likes (Given)
    Likes (Received)

    Default Crash cart out for qt18

    i have a 1995 qt 18 tplus with a Mitsubishi Numerical Control. last month the qx084 power supply went and was replaced due to leaking caps. last week, the qx141 cpu board also went. i was able to find a qx141 board on ebay and transferred over the eeprom/memory boards/ladder chip to this board and had to reset the control. When you reset the control, you loose everything. When i got the machine, i took screen shots of all the parameters since i do not have a cassette.

    im missing page 8 for the spindle parameters. Anyone with a qt15/18 around the same year that could take a picture? in order to get to the spindle parameters you have to be in privileged mode see below.

    For reference, here is the tplus manual on what to do if you need to reset:
    (i guess you cannot reference another site? its cnczon)


Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts