SQT-10M T-Plus. I powered up the machine. Set a tool with the tooleye. Was running the spindle at about 500 rpm to let it warm up a bit. Pulled up the program and standing there looking at it and then I heard a noise like a breaker kicking out. I then lost the screen and hydraulics. I then shut everything off and powered the main switch and I had the electrical cabinet fans as normal. Push the green button and the monitor fan came on but nothing else. I've tried resetting every breaker I could find and wiggled all the connections but still no screen or hydraulics. I don't know a whole lot about the electrical on this so any help would be GREATLY APPRECIATED!
Thanks!
Thanks!